STIEBEL ELTRON DEM series Bedienung Und Installation Seite 41

.CZ`<<`.HC
HBB.ZZ.HC.C&
DANGER Electrocution
The adjusting screw for setting the flow rate and the
potentiometer for setting the temperature are 'live' if the
appliance has not been isolated from the power supply.
f Remove the appliance cover.
qqq Z`. <é<`VHC HB
Setting the maximum temperature
Factory setting: 38 °C
ƒ&
ƒ&
ƒ&
f Using a screwdriver, set the potentiometer to the required
maximum temperature.
f Fit the appliance cover.
Limiting the flow rate
Factory setting: Maximum flow rate
B ’ Ô