Setting up
Inserting batteries
♦
Open the battery compartment. Turn the cover clockwise until the
arrows on the cover
other (see fig. A).
♦
Remove the cover.
♦
Insert two 1.5V AA/Mignon/LR6 batteries into the appliance as
indicated in the battery compartment (see fig. B).
♦
Place the cover on the appliance so that the arrows on the cover
and on the appliance
♦
Close the battery compartment. Turn the cover anticlockwise until
the arrows on the cover
(see fig. C).
NOTE
►
If the motor becomes quieter or the suction power decreases, a
battery change is necessary.
STM 1.5 A1
and on the appliance
are on top of each other (see fig. C).
and the collecting tray
are above each
are aligned
GB │ IE
│
33
■