Clatronic mc 1023 cd Bedienungsanleitung Seite 49

5....-05-MC 1023
STOP (14/B):
REPEAT (16/F):
MUTE (C):
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the STOP key.
2. Press the MEMORY key (15/G). The number „00" (storage location) and the
symbol MEMORY flash in the display. Use the I
desired track and then press the MEMORY button again. Repeat the procedure
until all the desired tracks are selected.
3. Press the / II PLAY/PAUSE button. The playback starts. The MEMORY
display flashes and the
button to pause briefly the playback (see the section on PLAY/PAUSE).
4. Press once the
5. To play the programme again, please first press the MEMORY button and then
the / II PLAY/PAUSE key.
6. In order to delete the programme (in STOP mode), first press the MEMORY
button and then the
The device stops automatically once the entire sequence of programmed tracks is
completed. The programme is also deleted if you change to another mode, e.g.
TUNER, remove the CD from the CD compartment or switch the machine off.
It is also possible to combine the programmed tracks with the REPEAT function.
After you have programmed and started the device, please press the REPEAT but-
ton (16/F) up to three times and then you can use the functions as described under
„REPEAT".
19.08.2004 12:15 Uhr
The CD is stopped.
Press once = he current track is repeated continuously
(REPEAT appears in the display).
Press a second time = the whole CD is played
continuously (REPEAT ALL appears in the display).
Press a third time: the function is deactivated.
This is used to switch off the sound. In order to hear
sound again, press the MUTE button a second time.
PLAY symbol is shown in the display. Press this
STOP key to stop the playback while retaining the program.
STOP button. The MEMORY display goes off.
Seite 49
I buttons to select the
49
GB