Lenze L-force Drives 8400 motec Montageanleitung Seite 46

6 Settings
Setting with the diagnosis terminal (keypad)
"SET" mode
The right softkey "SET" serves to change from the display mode to the SET mode.
In the SET mode, the speed setpoint can be changed and the controller can be
enabled/inhibited (RFR/run). The SET mode can be quit with the right softkey
"DISP". The change of the modes must always be confirmed with the right
softkey "OK".
l
46
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 3.1