Setting Elements - Lenze L-force Drives 8400 motec Montageanleitung

6 Settings

Setting elements

The setting elements are positioned on the inside of the Drive Unit.
Settings carried out by DIP1, DIP2, P2, P3, and P1 must be activated with DIP1/1.
The settings are accepted again during every mains connection. Changes to
parameters made in the meantime may be overwritten by this.
Name
DIP1
Switch for basic setting of quick commissioning
DIP2
P1 Setting "Top Cover: Speed ... %"
P2 Setting "Speed ... %", (speed)
P3 Setting "Ramp ... s", (acceleration/deceleration time)
X70 Connection for USB diagnostic adapter E94AZCUS or diagnosis terminal
0
LED status display
42
l
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 3.1
E84DG041, E84DG044