Important Emc Notices For Use In Medical Environments - Sony HVO-4000MT Vor Verwendung Dieses Geräts

Important EMC notices for use in medical environments

• The HVO-4000MT needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information provided in the instructions for use.
• The HVO-4000MT is intended for use in a professional healthcare facility environment.
• Portable and mobile RF communications equipment, such as cellular phones, can affect the HVO-4000MT.
Warning
• Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the
HVO-4000MT. Otherwise, degradation of the performance of this equipment could result.
• If the HVO-4000MT will be used adjacent to or stacked with other equipment, normal operation of the HVO-4000MT
under such configurations should be verified via observation.
• The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony
Corporation, may result in increased emissions or decreased immunity of the HVO-4000MT.
Guidance and manufacturer's declaration – electromagnetic emissions
The HVO-4000MT is intended for use in the electromagnetic environment specified below. The customer or the user of
the HVO-4000MT should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
4
GB
Compliance
The HVO-4000MT uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
Group 1
not likely to cause any interference in nearby electronic
equipment.
The HVO-4000MT is suitable for use in all establishments,
Class B including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Class A
Complies
Electromagnetic environment – guidance