Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Menu Settings - EuroLite N-130 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating conditions
Prior to transportation, allow the machine to cool down and completely empty the tank.
Never operate the fog machine without fog fluid. Fire hazard due to overheating! Besides, the unit may
be damaged.
During operation smoke emission may stop. In this case the device is heating up again. After a short
period, the machine will be ready to emit fog again. This process guarantees an appropriate
vaporization temperature and the best fog emission possible. The temperature is regulated by a high-
quality thermostat.
• Prior to switching on, check the fluid level of the tank and fill up fog fluid, if required.
• Connect the machine to the mains with the power plug.
• The machine does not feature a power switch. When the machine is connected to the mains it is powered on
and starts the warm-up process. The display indicates "Warming Up". While the machine is warming up, fog
output will not be possible yet. Once the warm-up process is completed, the display indicates the standard
screen "Ready To Fog" and fog output will be possible; either via the menu or via DMX.
• When the tank runs out during use, the fluid pump is switched off automatically for protection purposes and "No
Fluid" is shown on the display. Disconnect the fog machine from the power supply before changing the tank or
filling it with fog fluid. Then, keep pressing the ENTER button in order to completely fill the fluid hose with fog
fluid again, in order to prevent the automatic pump switch-off from reactivating.
Notes
• All fog machines may sputter small amounts of fog occasionally during operation and for a minute or so after
being turned off.
• All fog machines have a recycling period after long bursts when the machine will shut itself down for a short
period in order to heat up again. During this time no fog can be produced.
Operating buttons
Button
MENU
▲ / TIMER
▼ / VOLUME
ENTER / STOP

OPERATION

Warming Up

MENU SETTINGS

Function
Selecting menu items
Setting values and options
Activates timer mode
Setting values and options
Activates manual mode
Returns to home screen
Stops fog output
CAUTION!
Ready To Fog
No Fluid
18 • EN

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis