Overview
(1) Remote control
(2) Escape nozzle
(3) Housing
(4) Mounting bracket
(5) Fluid tank
(6) Power switch
(7) Remote control
(8) Power supply
(9) Fuseholder
(10) Fluid level display
(11) Attachment eyelet
STARTING OPERATION
Remove all packing materials from the shipping box. Make sure that there are no packing remnants at the
fog output nozzle.
Unscrew the tank cap and fill the tank with fog fluid. Tightly close the tank again.
Install the device on a plane surface.
Installation
Install the device in a well-ventilated area. The operation in an unsufficiently ventilated room can lead to a
condensation of the smoke fluid. The resulting slippery surface can cause accidents. Keep a minimum
distance of 20 cm around and above the device.
Furthermore do not orientate the escape nozzle directly in the direction of the audience's eyes. In order to
create a good effect, there should be a distance between the device and the audience of at least 1.5 m.
Only install the smoke-machine on fire-resistant, scratch-resistant and water-resistant surfaces.
Please make sure that the inclination angle does not exceed 15°.
00100748.DOC, Version 1.0
14/20