Starting Operation - EuroLite N-10 Bedienungsanleitung

5
6
7
8
(5) Remote control-socket
(6) Fuseholder
(7) Power switch
(8) Power supply
(9) Attachment eyelet

STARTING OPERATION

Install the device on a plane surface.
The fluid tank of the device needs to be filled with smoke fluid before starting up operation and always
disconnected from the mains as fluid could be spilled.
Only use quality smoke fluids available at your dealer. We recommend high-quality Eurolite smoke fluids (e.
g. Eurolite Smoke Fluid "P" professional, 5 l). You must not use substances that are classified as "dangerous
working material" or "inflammable fluids".
If fluid should get into the interior of the device, disconnect from mains immediately and consult a technician.
Fluid level:
Maximum
Remote
Control
Fuse: F 3.15 A, 250 V
ON
Power supply:
230 V AC, 50 Hz
OFF
Typ/Type/Type: N-10
Spannungsversorgung/Power supply/
Alimentation: 230 V AC, 50 Hz ~
Gesamtanschlusswert/Power consumption/
Puissance de rendement: 400 W
Sicherung/Fuse/Fusible: F 3.15 A, 250 V
Minimum
Year of construction: 2002
eurolite
15/35
Safety rope
MADE IN CHINA
®
51701943_V_1_0_3046.DOC
9