Product Description; Intended Use; Device Description; Scope Of Delivery - Bosch TTM 2104 Originalbetriebsanleitung

en | 36 | TTM 2104 / TTM 2204 | Product description
4.

Product description

4.1

Intended use

The tread pattern measurement tool TTM 2104 / TTM 2204 is
intended for the indoors optical measuring of the tread
depth of passenger cars and commercial vehicles up
to 4 t. Any other or additional application does not
constitute intended use.
TTM 2104 / TTM 2204 is not suitable for the measuring of vehicles
with twin-tires.
The following tables contains all mandatory values of
the vehicle to be tested.
Function
Number of axles
Axle load
Wheel load
Track width
Rim width
Tread depth
Ground clearance
Height deviation vehicle wheels left
to right
Crossing speed
4.2

Device description

TTM 2104 / TTM 2204 consists of 2 measuring units ("Master" and
"Satellite") with 2 ramps each to drive up and down,
and an electrical cabinet.
Smart TV, screen or tablet and Access Point are
necessary to display the results (to be ordered as
optional accessories).
Fig. 1: TTM 2104 / TTM 2204
1 Drive-up ramp
2 Measuring Unit "Master"
3 Drive-down ramp
4 Wireway
5 Measuring Unit "Satellite"
|
1 691 206 005 2019-02-25
4.3
Over-ground version for standard installation, order
number
Over-ground version for inspection pit, order number
Specification
1 691 200 001
2
up to 4 t
up to 2 t
1080 mm - 1820 mm
110 mm - 300 mm
0.5 mm - 8.0 mm
min. 110 mm
max. 30 mm
0.5 km/h - 8 km/h
4.4
Information can be obtained from your Bosch
franchised dealer.
i

Scope of delivery

1 691 200 000
Component
Ramp
Measuring Unit
Electrical cabinet
Power line, 10 m
Data cable
Squeegee for glass plates
Component
Ramp
Measuring Unit
Electrical cabinet
Switch
Power line, 10 m
Data cable
Squeegee for glass plates
Spare part, wearing parts and special
accessory
the following components should be used for cable
extensions by the customer:
RJ45 duplex clutch, shielded, 1:1, at least Cat 5E.
Data cable, at least Cat 5E, S-FTP.
The cable extensions must satisfy the requirements
of the RHL (e.g. IP, chemical resistance, temperature
range).
Quantity
4
2
1
1
2
1
Quantity
4
2
1
1
1
2
1
Robert Bosch GmbH