Bosch TTM 2104 Originalbetriebsanleitung Seite 50

en | 50 | TTM 2104 / TTM 2204 | Software configuration
8.2.2 Workshop
Enter and edit workshop information.
¶
Save changes with <Apply>.
No. Screen element Description
1 Apply Saving changed settings.
2 Workshop address Entering the workshop address.
3 Additional Entering additional information.
information
4 Workshop logo Selecting and uploading the
workshop logo.
5 Individual standby Selecting and uploading the
individual standby.
6 Display after Set the number of seconds upon
successful measurement after which
stand-by shall be displayed.
Individual stand-by is not displayed
if "0" has been entered or no image
file has been uploaded.
|
1 691 206 005 2019-02-25
8.2.3 Thresholds
Enter and edit thresholds.
¶
Save changes with <Apply>.
No. Screen Description
element
1 Apply Saving changed settings.
2 Changing a threshold to "0".
3 Entering the minimum and recommended
threshold for summer tires.
4 Entering the minimum and recommended
threshold for winter tires.
i
Minimum threshold "0": only the recommended
threshold is considered in the result display. The
results are highlighted green or yellow (see chap.
8.3).
Recommended threshold "0": only the minimum
threshold is considered in the result display. The
results are highlighted green or red (see chap. 8.3).
Both thresholds "0": no threshold is considered in
the result display. All results are displayed in the
color of the standard text. The input boxes in the
"simple view" result display remain white (see chap.
8.3).
Robert Bosch GmbH