Viatom Checkme Pro Benutzerhandbuch Seite 9

Daily Check provides the trending graph of heart rate, SpO
the trend, tap the
BP Calibration
Warnings and Cautionary Advices
For a given user, it is suggested to make BP calibration every three months.

To get blood pressure readings, this device should be calibrated by a doctor with a
traditional cuff blood pressure (BP) meter. Because of individual differences, each user
must make his/her own calibration before using Daily Check to measure or track the
blood pressure. The calibration should be performed when the user is under calm status.
To calibrate with a cuff BP meter, follow the steps as below.
1. Select the <Settings> icon, select <BP Calibration>, and then choose the right user.
2. Ensure that the cuff and the Checkme monitor are at the same level as your heart.
Then start the blood pressure measurement from the cuff BP meter.
3. Press the
measurement.
4. When the blood pressure measurement is finished, manually input the readings of
systolic pressure reading in the Checkme.
5. Repeat the calibration once again by following the above steps.
2.3 ECG Recorder
About ECG Recorder
The ECG recorder offers four different methods to measuring ECG. Tap the
switch between two pages.
As shown above, from left to right, there are:
Method A: Lead I, right hand to left hand

Method B: Lead II, right hand to left abdomen

Method C: Lead I, left wrist to right wrist

Method D: Lead II, right wrist to left lower abdomen

ST segment analysis is performed on selected LEAD.
button, then select one record, and then tap the
button on the Checkme screen, and start the DailyCheck
and blood pressure. To view
2
8
button.
icon to