Using Checkme; Prior To Use; Charge The Battery; Power On/Off - Viatom Checkme Pro Benutzerhandbuch

1.7 Symbols
Symbol
CE0197
IP22
2.

Using Checkme

2.1

Prior to Use

Charge the Battery

To charge the battery,
1. Connect the smaller end of the USB charging cable to the multi-functional
connector
2. Connect the other end of the USB charging cable to the USB charging port.
3. When the LED turns to green, it means the battery is fully charged.
Warnings and Cautionary Advices
The device cannot be used for any measurement during charging.

Use charging adapter provided by manufacturer, or USB charging devices which

comply with the standard of IEC 60950.

Power On/Off

Press the Power On/Off button to power on the device. Press and hold Power On/Off
button for 2 seconds to power off the device.
Meaning
Application part type BF
Manufacturer
In conformity with Directive 93/42/EEC
European Representative
Symbol for "ENVIRONMENT PROTECTION – Waste electrical
products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authority or
retailer for recycling advice".
Against ingress of solid foreign objects ≥12.5mm diameter, Against
dripping(15° tilted)
Follow operating instructions
No alarm system.
6