Daily Check - Viatom Checkme Pro Benutzerhandbuch

2.2 Daily Check

About Daily Check
Daily Check measurement is a function that combines the measuring of ECG
(Electrocardiograph), SpO
20 seconds to collect your vital signs before giving you vital signs readings and your
health evaluation.
Using Daily Check
To start a Daily Check, follow the steps as below.
1. If you have not created user, then please follow the instruction in [Settings Section]
to add your user account.
2. Tap the <Daily Check> icon in the middle of the screen.
3. Choose the right user.
4. Hold the device according to the instruction, keep the device at the same level as
your heart, and keep stable posture and stay calm. Don't exert too much pressure
on the ECG electrode, which may result in EMG (electromyograph) interference.
Just hold gently and ensure good contact with the ECG electrode. Do not exert
pressure on the finger that put in the SpO
ensure good blood perfusion.
(4)
(1) Put the right forefinger into the built-in SpO
squeeze the edge of the SpO
to raise it up as shown below.
(2) Press the right thumb on the right electrode.
(3) Press the right middle finger on the back
electrode.
(4) Press the left electrode to the left palm.
5. Once the device detects stable waveform, it will
automatically
countdown bar moves from left to right.
6. When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
(blood oxygenation) and systolic blood pressure. It takes only
2
start the measurement.
sensor. Just fit it inside but gently to
2
2
sensor cover, then move in upward to the left
2
The
7
sensor. Use the finger nail to
(1)
(2)
(3)