Viatom Checkme Pro Benutzerhandbuch Seite 11

Palms facing up, place an electrode in the middle of right wrist;

For method C, place another electrode in the middle of left wrist;

For method D, place another electrode in the left lower abdomen;

3. The display will then show your ECG waveform.
The device will monitor your ECG continuously, however no data will be saved until
you press the
4. Press the
from left to right.
5. When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
Quick ECG
If the <Quick ECG> function is enabled, then you can start an ECG measurement very
quickly by picking up the device and hold it according to method A. This saves time and
is much easier for use.
In the Settings menu and tap <Quick ECG> to enable or disable this function.
2.4 Temperature
About thermometer
Warnings and Cautionary Advices
The thermometer is only designed for the measuring area on the human body

stated in this manual.
The device needs to be in the room which the measurement is taken for at least

10 minutes before use.
Physical activity, increased perspiration on the forehead, taking vasoconstictive

medication and skin irritations can distort the result.
The forehead (temples) must be free from perspiration and cosmetics.

Influences on forehead temperature include but not limited to
button.
button to start collecting your ECG data. The countdown bar moves
10