Viatom Checkme Pro Benutzerhandbuch Seite 6

1. Current time
2. Current date
When a reminder event happens, this area displays the event name, e.g. "Daily
Check".
You are allowed to change the current time and date when the device is powered on at
the first time. Or you can also go to the Setting menu to change it.
3. This arrow indicates users to press the Home button to exit the Calendar Screen /
Standby Mode.
4. Battery indicator
5. If you failed to respond to the previous reminder event, then that event will be
shown in this area.
6. This icon appears when <Quick ECG> is enabled.
7. This icon appears if you have set reminder event.
1.6 Result Screen
For each measurement, a Result report will be provided after the measurement is
finished. An example is shown as below.
1
2
1. Measured parameters and readings
2. A summary of this measurement
3. A graphic indicator about the health status
: All measured parameters are within the reference range;
: One or more than one measured parameter(s) is (are) out of reference range.
When the
for help.
4. Buttons
Select

Press and hold the

for Daily Check and ECG Recorder measurements.
Select

Press

icon appears, it is suggested to test again, and consult your doctor
button to start a measurement again.
button to add voice memo. Voice memo is only available
button to review previous results.
button to open the help information.
5
3
4