Viatom Checkme Pro Benutzerhandbuch Seite 13

2. Insert the forefinger into the built-in SpO
Relax your forefinger and do exert pressure.
3. When the device detects stable waveform, it will automatically start the
measurement. The countdown bar moves from left to right.
4. When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
Measuring with Cable
1. Connect the external SpO
2. Put your index finger or middle finger into the external SpO
the cable is positioned along the top of the hand, and the finger nail is in the
position as shown below.
3. Tap the <Pulse Oximeter> icon.
4. The display will then show your PLETH waveform, SpO
The device will monitor continuously, however no data will be saved until you
press the
5. Press the
sensor to the multi-functional connector.
2
button.
button to start collecting your SpO
sensor as shown below.
2
data. The countdown bar moves
2
12
sensor. Make sure
2
Finger nail position
and pulse rate.
2