Data Plate; Noise Level Label; Ehtma Category; Safety Label - Atlas Copco LCD 500 Sicherheits- Und Betriebsanleitung

Safety and operating instructions

Data plate

A. Maximum permitted hydraulic oil flow
Machine type
B.
Maximum permitted hydraulic pressure
C.
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
Serial number (is also stamped in the valve
E.
housing).
The CE symbol means that the machine is
F.
EC-approved. See the EC declaration which
is delivered with the machine for more
information.
Year of manufacture.
G.

Noise level label

The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.

EHTMA category

The machine is clearly marked with EHTMA
categories. It is important that any power source used
is in a compatible category. If any doubt, consult an
authorised supervisor.
14

Safety label

RPM label

Installation

Hoses

For connection on the machine, the hydraulic hose
must be approved for a working pressure of at least
160 bar (2300 psi) and have a ½" inner diameter. To
resist exterior wear and tear, we recommend using
a 2-layer hydraulic hose. The machine connection
marked P (pump) is the oil inlet, and the connection
marked T (tank) is the oil outlet. Always connect both
hoses and make sure that all hose connections are
tight. Never carry the machine by the hose.

Quick-release couplings

The original Atlas Copco hydraulic hoses are fitted
with Flat-Face quick-release couplings that are strong
and easy to clean. The quick-release couplings are
fitted so that the male connection supplies oil and
the female connection receives oil.
NOTICE Wipe all couplings clean before
connecting. Ensure that couplings are clean and
correctly engaged before operation. Failure to do so
may result in damage to the quick couplings and
© 2010 Atlas Copco Construction Tools AB | No. 3392 5189 90a | 2010-01-01
LCD 500, 1500
Original instructions