VOLTCRAFT Retlux RDM 9001 Handbuch Seite 82

store the recording data of one time . When start to record, the earlier
record in the multimeter will be overwritten.
After starting, in two seconds, the APP interface will display
(4)
The Android device will disconnect with the multimeter in two seconds.
After disconnecting, the Bluetooth of the multimeter is in low-power
state. The information will be shown on APP:
The multimeter will record the current measurements and store in the
memory. After completion of the record, the Bluetooth of the
multimeter will be disabled automatically, and the Bluetooth symbol on
the multimeter screen will disappear.
After completion of the record, to read the measuring data, press and
(5)
hold until
device and the multimeter.
Note: If the multimeter is in the process of recording data and not
finished yet, connect the Android device and the multimeter, a dialog
box will pop up:
Select
Android device will connect with the multimeter to read data.
Select
the connection will be aborted.
In APP single view, tap on the
(6)
RDM 9001
appear on the display. Reconnect the Android
, the recording process will be interrupted. The
, the multimeter will continue recording,
from the pop-up menu.
icon on the top right, select
14
EN