Grundig GDL 2661 X Handbuch Seite 21

INSTALLATION OF THE APPLIANCE
Carry out all the masonry work
7
necessary (e.g. 19 installation of
an electric socket and/or a hole
for the passage of the discharge
tube).
In the case of the presence of pan-
els and/or walls and/or lateral wall
units check that there is sufficient
space to install the hood and that
access to the command panel is
easy.
To remove the hood from the wall
unit, perform the mounting steps in
reverse order.
Caution: Use suitable cut resistant
gloves.
Start detaching the hood from the
double-sided adhesive that keeps it
adherent to the bottom of the wall
unit (see also Fig. 4)
Therefore, use a cutter that can be
slipped between the sheet metal of
the hood and the bottom of the wall
unit on the right and left sides. Fig.
A
ENG
DE
NO
DA
SV
FI
PL
21