Proper Use; Technical Data; Before Starting The Equipment - EINHELL 41.334.20 Originalbetriebsanleitung

3. Proper use

The suction spray gun is a pneumatically opera-
ted tool for versatile use. The gun is suitable for
sand-blasting painted and rusty components.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Remember.
Too small a diameter of the hose and too
long a hose line will result in loss of power.

4. Technical data

Operating pressure .............................max. 7 bar
Air consumption (7 bar).................. min. 167 l/min
Recommended hose inner diameter .. from 9 mm
Sound pressure level L
Sound power level L
Vibration a .......................................... <2.5 m/s
w
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
Anl_Saugstrahlpistole_SPK9.indb 14 Anl_Saugstrahlpistole_SPK9.indb 14
GB
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the power
supply make sure that the data on the rating plate
are identical to those of the supply voltage.
Disconnect the compressed air supply before
performing any cleaning, adjusting and main-
....................... 83 dB(A)
tenance work.
pA
........................... 94 dB(A)
wA
Air supply:
2
Via a compressed air source with pressure setting
function, e.g. a compressor.
Performance values of the compressor:
The compressor used should have a tank volume
of at least 50 liters.
Setting values for work with the suction
spray gun:
Set a maximum working pressure of 7 bar at your
compressed air supply.
5.1 Fitting the suction hose (Fig. 3-4a)
Attach one end of the suction hose (1) to the
suction hose port (3) of the spray gun handle and
the other end of the hose to the intake tube (2).
Ensure that the distance between the end of the
hose and the intake tube is approx. 5 mm. This
prevents a vacuum from being generated when
the suction function is activated.
- 14 -
01.10.2019 09:36:45 01.10.2019 09:36:45