Inhaltsverzeichnis
Werbung
How to save energy
S Install the appliance in a dry, well ven
tilated room, but not in direct sunlight
and not near a heat source (e.g. radiator,
cooker, etc.). If required, use an
insulating plate.
S Do not block the ventilation openings
in the appliance.
S Allow warm food to cool down before
placing it in the freezer.
S When thawing frozen food, place it in
the refrigerator compartment. The low
temperature of the frozen food will then
cool the food in the refrigerator
compartment.
S Defrost the appliance when ice forms.
A thick layer of ice impairs refrigeration
of the frozen food and increases the
power consumption.
S When loading or unloading the freezer,
open the appliance door as briefly as
possible.
The briefer the appliance door is
opened, the lower the ice formation
on the freezer shelves.
S To prevent the food from warming up
quickly in the event of a power failure
or malfunction, take ice blocks from the
freezer tray and place them in the top
compartment directly on the food.
S Occasionally clean the rear of the
appliance with a vacuum cleaner or
paint brush to prevent an increased
power consumption.
Operating noises
Normal noises
Humming - refrigerating unit is running.
Bubbling, gurgling or whirring noises -
refrigerant is flowing through the tubing.
Clicking - motor is switching on or off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. Use the height adjustable feet
or place something under the feet.
The appliance is not free standing
Please move the appliance away from
adjacent units or appliances.
Drawers or storage areas wobble
or stick
Please check the removable parts and,
if required, reinsert them.
Bottles or receptacles are touching
each other
Please move bottles or receptacles away
from each other.
en
25
Werbung
Inhaltsverzeichnis
