Riello RC2R Montage- Und Bedienungsanleitung Seite 59

4
3
2
1
0
14 16
D7016
1.5
2.4 ACCESSORIES
BF AIR INTAKE
In case of BF application, air is fed in through a flexible or
rigid pipe connected to the air intake (A, fig. 5, page 4).
This component is supplied separately.
To install this fitting, you must:
remove the knob unit (1) from the burner by unscrewing
➤
the two screws (2), see fig. 2;
apply the O-ring (4) to the air intake (3) as illustrated in
➤
figure 3;
place the air intake (3) horizontally against the feeder (5),
➤
making sure you pull the locking device (6, fig. 5, page
4);
turn clockwise to fasten the air intake (3) to the burner
➤
and release the locking device (6). The air intake can be
turned to meet installation needs, as illustrated in figure
4.
To adjust, you must pull the locking device (6, fig. 5,
➤
page 4) and turn the air intake until you are happy with
the position.
Fig. 4
VERSION WITH BAFFLE PLATE CF - BF
735T1
18 20 22 24 26
2
3
735T3
28 30 32 34 36
3
2.5
2
1
Fig. 3
3 GB
735T4
38 40 42 44 46
3.5
9
4
48 kW
kg/h
4
Fig. 2
5
2
D7014
3
D7005
2902936