Transport Readiness
• Swivel guide roller (15) upwards.
• Push hot-air blower (8) to the right until the locking cam (10) latches into the recess of the holding handle (28).
The hot-air blower (8) is in the parked position.
• Lower the transport rollers (26) by swivelling the handle (27). The pressure roller (11) and diverting roller (12)
are relieved for transport in this way.
8
15
Moving
Button Combinations
Main switch ON
ON
Keep Drive and Heating buttons pressed
with main switch ON at the same time
28
10
10
Carrying
ON
27
26
Release
Release
Release
Release
12
11
6.0
620
Work Mode
Section 1
80
%
Profile
1 1
2
3
Profile Setup
Section 2
27