Vitek VT-1477 GR Betriebsanweisung Seite 5

Before using the unit
– Before using the unit wash the blender
attachment (1), whisks (7), measuring bea-
ker (8), bowl (9), shaft (10), knives (11, 12),
shredding/slicing disks (13, 14), bowl lid (15)
and pushers (21, 22) with warm water and
neutral detergent, then rinse and dry.
Wipe the motor unit (2), whisk gear (16)
–
and geared lid (16) with a soft slightly damp
cloth.
Attention! Do not immerse the motor unit (2),
whisk reduction gear (6), geared lid (16), power
cord and power plug into water or any other
liquids.
Do not put the attachments and bowls in a dish
washing machine.
Selection of attachment rotation speed
To select the attachment rotation speed
–
press and hold the (4) button and rotate the
speed control (5).
To increase the attachment rotation speed
–
turn the handle (5) counterclockwise, to
reduce - clockwise.
For operation at the maximal rotation speed,
–
press and hold the (3) "TURBO" button.
Using the blender
Use the blender attachment (1) for chopping,
mixing the products as well as for Smoothie
cooking - a cocktail from fruits and fruit puree
with milk, yoghurt, crushed ice or ice cream.
WARNING: before assembling make sure
that the power plug is not inserted into the
socket.
Insert the blender attachment (1) into the
–
motor unit (2), and turn it until bumping.
– Insert the plug into the socket. The blender is
ready for operation.
Immerse the blender attachment (1) into the
–
bowl with food, that you want to chop/mix;
you can use the measuring beaker (8) for it.
Press and hold the on button (3), select the
–
required rotation speed by turning the speed
control (5) or press and hold maximal attach-
ment rotation speed button "TURBO" (4).
Note: Products should be put into the bowl
before switching on the unit.
Before starting to chop/mix, we recommend
to peel fruit, remove inedible parts, such as
bones, and cut fruit into 2х2 cm cubes.
VT-1477 IM.indd 5
After you finish using the unit, take the plug
–
out of the socket and remove the attach-
ment (1).
Attention!
•
Do not remove the attachment (1) during
blender operation.
•
In order not to damage the blades, do not
process too hard products such as cere-
als, rice, coffee beans, frozen food.
• The maximal allowable continuous oper-
ation time should not exceed 1 minute
with subsequent 2 minute break.
USING WHISKS
Use the whisks (7) only to make cream, biscuit
dough or mixing ready desserts.
WARNING: before assembling make sure
that the power plug is not inserted into the
socket.
Insert the whisk reduction gear (6) into the
–
motor unit (2), and turn the reduction gear
(6) until bumping.
Insert the whisks (7) into the reduction gear
–
(6).
– Insert the plug into the socket.
– Put the whisks (7) into the bowl with food.
Press and hold the on button (3), select the
–
the required whisk rotation speed by turning
the speed control (5) or press and hold maxi-
mal whisk rotation speed button "TURBO"
(4).
After you finish using the unit, take the plug
–
out of the socket, disconnect the whisks (7)
from the reduction gear (6), and remove the
reduction gear (6) from the motor unit (2).
Attention!
• Do not use the whisks (7) to make tight
dough.
•
Products should be put into the bowl
before switching on the unit.
•
The maximal allowable continuous oper-
ation time should not exceed 1 minute
with subsequent 2 minute break.
USING THE CHOPPING KNIVES
The chopping knives (11, 12) are used to chop
meat, cheese, onion, herbs, garlic, carrots,
walnuts, almonds, fruits.
Attention! Do not chop very hard products,
such as nutmegs, coffee beans and cere-
als.
5
ENGLISH
09.02.2012 10:28:41