Siemens ET 200SP Systemhandbuch Seite 278

cULus - Zulassung
Underwriters Laboratories Inc. nach
● UL 508 (Industrial Control Equipment) ODER UL 61010-1 und UL 61010-2-201
● CSA C22.2 No. 142 (Process Control Equipment) ODER CSA C22.2 No. 61010-1 und
CSA C22.2 No. 61010-2-201
ODER
cULus HAZ. LOC. - Zulassung
Underwriters Laboratories Inc. nach
● UL 508 (Industrial Control Equipment) ODER UL 61010-1 und UL 61010-2-201
● CSA C22.2 No. 142 (Process Control Equipment) ODER CSA C22.2 No. 61010-1 und
CSA C22.2 No. 61010-2-201
● ANSI/ISA 12.12.01
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for cULus haz.loc.
● WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is
known to be non-hazardous.
● WARNING - Explosion Hazard - Substitution of components may impair suitability for
Class I, Division 2 or Zone 2.
● This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I,
Zone 2, Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING
PROPERTIES OF MATERIALS USED IN THE RELAYS.
ODER
CSA
CSA C22.2 (Industrial Control Equipment Motor Controllers)
ODER
Dezentrales Peripheriesystem
Systemhandbuch, 09/2019, A5E03576848-AJ
14.1 Normen, Zulassungen und Sicherheitshinweise
Technische Daten
277