Description; Correct Use; Accessories - Hilti UH 240-A Bedienungsanleitung

2. Description

The UH 240-A is a cordless hammer drill for professional
use.
The tool is suitable for use by right or left-handed
persons. The ergonomically designed rubber-padded
grip reduces fatigue and is designed to provide a secure
en
hold.
The items supplied include: Electric tool with side handle,
3 bits and magnetic bit holder, two B24/2.0 NiCd, B24/2.4
NiCd or B24/3.0 NiMH batteries, C 7/24, C 7/36-ACS or
TCU 7/36 charger in toolbox or cardboard box.

2.1 Correct use

The UH 240-A is hand-held cordless hammer drill for
driving and removing screws, drilling in steel, wood and
masonry and hammer drilling in masonry only.
It is intended for use on construction sites of all kinds
for general construction, interior finishing, conversion
and renovation work.
The tool may be used only in a dry environment.
●
Do not use the tool where there is a risk of fire or explo-
●
sion.
Use only the insert tools and accessories intended for
●
use with this tool.
The tool may be powered only by the batteries approved
●
for use with this tool.

3. Accessories

Magnetic bit holder
Bits
Charger
Charger
Charger
Battery
Toolbox / cardboard box
Belt adaptor
Dust shield
12
Printed: 07.07.2013 | Doc-Nr: PUB / 5071284 / 000 / 00
S-BH 50M
EU
Pozidrive S-B PZD 3T
Torx S-B TX 30T
Torx S-B TX 40
C 7/24
C 7/36-ACS
TCU 7/36
B24/2.0 NiCd, B24/2.4 NiCd or B24/3.0 NiMH
BAP 24
Do not use the batteries as a power source for other
●
equipment.
Use only the recommended battery charger.
●
Modification or manipulation of the tool other than
●
described in these operating instructions is not per-
missible.
To avoid the risk of injury, use only original Hilti acces-
●
sories and additional equipment.
Observe the information printed in the operating instruc-
●
tions concerning operation, care and maintenance.
The tool and its ancillary equipment may present ha-
●
zards when used incorrectly by untrained personnel
or when used not as directed.
2.2 Important features of the tool
– Vibration-absorbing grip (rubber-padded)
– Smooth speed control
– Gearing and clutch with permanent lubrication
(grease)
– Automatic cut-out carbon brushes
– Forward / reverse rotation
USA
2 Phillips
1 Phillips
S-B PH 3×2"
S-B PH SQ2