Herunterladen Inhalt Inhalt Diese Seite drucken

Button Combinations; Replacement Of Batteries In Remote Controller - Klarstein 9000 BTU Bedienungsanleitung

Fensterklimagerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Within 5s, press TIMER button again to cancel this function.
Note:
• Range of time setting is: 0.5~24 h
• The interval between two motions can't exceed 5s, otherwise the remote control will exit setting status.

Button combinations

Child lock function
Press "+" and "-" buttons simultaneously can turn on or turn off child lock function. When child lock function is
started up, LOCK indicator on remote controller is ON. If you operate the remote controller, remote controller
will not send any signal.
Temperature display switchover function.
Under OFF status, press "-" button and "MODE"button simultaneously can switch between °C and °F.
Operation guide
1.
After putting through the power, press "ON/OFF" button on remote control to turn on the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT.
3. Press "+" or "-" button to set your required temperature. (Temperature can't be adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed.

Replacement of batteries in remote controller

1.
Press the mark on back cover of batteries box cover for remote
controller withfingers as shown in the fig, and then remove the
batteries box cover along the arrowdirection.
2. Replace with two #7 (LR03/AAA 1.5V) dry batteries. Make sure
positions for "+" pole and "-" pole are correct.
3. Reinstall batteries box cover.
NOTICE
• The distance between signal sender and receiving window
should be no more than 8 m, and there should be no obstacles
between them.
• As signal will be interfered in the room with electronic fluorescent lamp, conversion fluorescent lamp or
wireless phone, please get closer to the air conditioner when using the remote controller.
• Replace new batteries of the same model when replacement is required.
• When you don't use remote controller for a long time, please take out the batteries.
Battery
Reinstall
Remove
Cover of battery box
24

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis