Control Panel And Button Functions - Klarstein KLIMAMOBIL Bedienungsanleitung

CONTROL PANEL AND BUTTON FUNCTIONS

ON/OFF button
1
Press the button to start and
stop the applianc
SWING button
Activates the swing function of
2
the slats.
FAN SPEED
Set the fan speed in the
3
following order: Low (LOW) >
Medium > (MED) > High (HIGH)
> TURBO.
[+] and [-] button
Press the [+] or [-] key to
increase or decrease the
temperature. The temperature
4
is allowed to be set between
16-30°C.
TIMER button
Press TIMER and then press [+]
or [-] to set the timer. Up to 10
hours, the time is increased in
0.5-hour steps with each press
4
of the button, above 10 hours
in 1-hour steps. You cannot set
a time from 0.5-24 hours.
MODE button
Press the button to select the
following modes: COOL > DRY
> FAN > HEAT (for models with
5
heating) or COOL > DRY > HEAT
(for models without heating).
FILTER CHECK
The light turns on when the
appliance has been running for
more than 250 hours. When
the light is on, switch off the
6
appliance, remove the air filter,
clean it and reinstall it. If the
light is still on, press the button.
EN
43