Klarstein 9000 BTU Bedienungsanleitung Seite 25

Control panel on the canbinet
If wireless remote controller is lost, open the surface panel and operate manually.
1 POWER BUTTON
Operation starts when pressing this button,
and stops when pressing this button again.
2 SWING BUTTON
Activate the automatic air swing function.
3 FAN SPEED BUTTON
Select the fan speed HIGH, MID, LOW and
AUTO in sequence.
4 TEMPERATURE BUTTON
Press  and  to increase or decrease the
set temperature. The temperature setting
rage is from 16-30 °C.
4 TIMER BUTTON
Press  and  in order to set the timer.
Timer can be set in 0.5 hour increments
between 1 and 10 hours or in 1 hour incre-
ments for 10 hours or above.
25
5 SIGNAL RECEIVER
6 MODE BUTTON
Select the operation mode COOL, FAN,
DRY.
7 FILTER BUTTON
This feature is a reminder to clean the air
filter (see Care and Cleaning) for more effi-
cient operation and cooling. The LED (light)
will illuminate after 250 hours of operation.
To reset after cleaning the filter, press the
FILTER button and the light will go off.