Guidelines And Manufacturer's Statement - Electromagnetic Emissions - Stryker Flosteady Handbuch

Guidelines and manufacturer's statement - electromagnetic compatibility
EN
40
14.4 Guidelines and Manufacturer's Statement – Electromagnetic
Emissions
The device FLOSTEADY Arthroscopy Pump is intended for use in the electromag-
netic environment specified below. The user/operator of the FLOSTEADY Arthros-
copy Pump should make sure the device is operated within such an environment.
Emitted interference Compliance
measurements
HF emission according Group 1
to CISPR 11
HF emission according Class B
to CISPR 11
Emission of harmonic Class A
oscillations according
to IEC 61000-3-2
Emission of voltage In compliance
fluctuations / flickers
according to IEC 61000-
3-3
Electromagnetic environment guide-
lines
The device FLOSTEADY Arthroscopy
Pump uses HF energy solely for its
internal functions. Therefore, the
camera's HF emission is very low and
it is unlikely that devices in close
proximity will experience interfer-
ence.
The device FLOSTEADY Arthroscopy
Pump is suitable for use in all facili-
ties including those in residential
areas and those directly connected
to a public utility network supplying
buildings used for residential pur-
poses as well.