Verwendungszweck
Pac III ist ein tragbares Gasmeßgerät für die kontinuierliche
Überwachung von toxischen Gasen oder Sauerstoff in der
Umgebungsluft am Arbeitsplatz, entsprechend dem einge-
bauten DrägerSensor.
Nicht für Messungen von Prozeßgasen!
Ein Betrieb der Gerätekombination Pac III mit Lithium-
Batterie und einem DrägerSensor XS EC ist zu vermeiden.
Es besteht die Gefahr, daß durch Ausgasen der Lithium-
Batterie das Sensorsignal driftet und der angezeigte Meßwert
verfälscht wird.
Die Gefahr besteht nicht bei Verwendung von einem Pac III
mit Alkali-Batterien bzw. einer wiederaufladbaren Versor-
gungseinheit und/oder DrägerSensoren EC (PacSensor II).
Pac III B asic
–
Steckbare elektrochemische DrägerSensoren für CO,
H
S oder O
.
2
2
–
Die Alarmschwellen für die Konzentrationsalarme sind,
abhängig von dem eingebauten Sensor, einstellbar.
8
Intended Use
Pac III is a portable gas monitor for continuous monitoring of
either toxic gases or oxygen in the ambient air at the workplace,
depending on which DrägerSensor is installed.
Not suitable for measuring process gases!
A use of a Pac III instrument with Lithium battery together
with a DrägerSensor XS EC (and only in this combination)
has to be avoided.
An outgasing battery will be results in a sensor drift and a
wrong reading in the display.
This problem does not occur when a Pac III instrument with
an alkaline battery or with a rechargeable supply unit and/or a
DrägerSensor EC (PacSensor II) is used.
Pac III B asic
–
Plug-in electrochemical DrägerSensors for CO, H
or O
.
2
–
The alarm setpoints for the concentration alarms can be
adjusted to suit the particular sensor installed.
S
2