–
Status des Meßwertspeichers, z. B.:
(nur bei Pac III E)
2. Zeile: aus, wenn der Meßwertspei-
cher ausgeschaltet ist
oder
restliche Zeit bis der Meßwertspeicher
überschrieben wird
oder
restliche Zeit bis der Meßwertspeicher
voll ist.
Wird die Taste innerhalb von 10 Sekunden
nicht betätigt, kehrt das Gerät automatisch
in den Meßbetrieb zurück.
Gerät ausschalten
M
E
Tasten »
« und »
« gleichzeitig mindestens
1 Sekunde drücken.
–
Hupe ertönt mit Signalton –
Alarmleuchte blinkt.
–
status of the Data Logger, e.g.:2. Zeile:
MeßLog:
(only for Pac III H)
05d
08:43h
Off, if the data logger is switched off
Dauer:
or
1 Min.
time remaining before logger begins to
overwrite
or
time remaining until logger is full.
If the key is not pressed within
0.0
10 seconds, the instrument returns to
measuring mode.
SO2
ppm
Switching off the instrument
Press keys »
one second.
–
A signal tone will sound and the alarm lamp will light up.
DatLogger:
05d
Period:
1 min.
SO2
M
E
« and »
« simultaneously for at least
08:43h
0.0
ppm
21