Use; Switching On And Off; Setting The Speed/Tightening Torque; Changing The Direction Of Rotation - Parkside PDSSA 12 A1 Originalbetriebsanleitung

With hammer function
In second gear (speed selector switch
position: 2)
you can reach a speed of approx . 3000 rpm for
carrying out drilling work .

Use

Switching on and off

Switching on:
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in .
The LED working light
ON/OFF switch
This provides illumination of the work area in
poor lighting conditions .
Switching off:
♦ Release the ON/OFF switch
appliance .

Setting the speed/tightening torque

♦ Press the ON/OFF switch
speed/tightening torque . Increasing the pres-
sure increases the speed/tightening torque .
■ The tightening torque depends on the selected
speed and impact duration .
ATTENTION!
♦ The tightening torque actually attained must
always be checked with a torque wrench!
NOTE
► The integrated motor brake ensures rapid
stoppage .

Changing the direction of rotation

♦ Change the direction of rotation by pressing
the rotation direction switch
or right .
■ 44 │ GB │ MT
lights up when the
is depressed lightly or fully .
to switch off the
lightly for a low
towards the left

Activate lock

♦ Push the rotation direction switch
in
middle position . The ON/OFF switch
blocked .

Inserting bits

♦ Insert a suitable bit or adapter (not supplied)
into the tool holder
♦ Pull the locking sleeve
the bit or the adapter to click into place .

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Never allow liquids to get into the appliance .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
NOTE
► Replacement parts not listed (such as batteries,
switches) can be ordered via our service
hotline .
into the
is
.
backwards and allow
PDSSA 12 A1