Warranty - Chicco Trio Love Up Bedienungsanleitung

checks always that they are fastened correctly.
WARNING: Never use the joined handgrips to lift the stroller
with your child in it!
PARKING BRAKE
The parking brake acts on both stroller's rear wheels at the
same time. The stroller features a STOP AND GO system to
guarantee ease of use; it is marked with coloured stickers on
the rear brake levers.
23. To brake the stroller, press the right lever down (fig. 23). A
red STOP sticker automatically appears and the opposite
lever springs up.
24. To release the stroller, press the left lever down (fig. 24). A
green GO sticker automatically appears and the opposite
lever springs up.
WARNING: Always apply the brakes whenever the stroller is
stopped. Never leave the stroller on a sloped surface, with a
child inside, even with the parking brakes engaged.
WARNING: After operating the brake lever, ensure that the
brakes are correctly engaged in both of the rear wheel units.
SWIVEL WHEELS
The stroller has front swivel/fixed wheels. It is recommended
to use the wheels in the fixed mode on particularly changea-
ble surfaces. The use of the wheels in the swivel mode is rec-
ommended in order to increase the control of the stroller on a
normal road surface.
25. To make the front wheels swivel, push the front lever down
with your foot as shown in fig. 25. To block the front wheels
in fixed mode, raise the lever with your foot. On fixed mode,
all the wheels will remain locked in straight position.
WARNING: Both wheels must always be locked or unlocked
at the same time.
FOLDING THE STROLLER
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance. Make sure that
during these operations the moving parts of the stroller will
not come into contact with your child . The stroller can be
closed either forward or parent facing. The instructions are the
same for both positions.
Before closing the stroller, close the hood by aligning it with
the backrest.
WARNING: Always disengage the joined handgrips (if pres-
ent) before closing the stroller.
WARNING: You must remove all contents from the basket be-
fore closing the stroller.
26. To close the stroller, press button 1 – push (fig 26) and at
the same time press button 2 under the wording 2-pull (fig.
26 A). Keeping both buttons pushed, pull up to activate the
closing mechanism (fig. 26 B). The stroller is now closed
completely (fig. 26 C). To reduce the space occupied by the
stroller when closed, recline the backrest.
WARNING: Once closed, button 1 returns to its starting posi-
tion (protruding), fig. 26D.
27. Tilt the handgrips forward (fig. 27). The closed and locked
stroller stands by itself.
USING THE CAR SEAT AND CARRYCOT
This stroller can only be fitted with the Oasys 0+ UP car seat
and the Love Up carrycot, which both require the same fasten-
ing system to be attached on the structure. To fasten and re-
lease the carrycot or the car seat, read the instructions below.
Before attaching the car seat or carrycot, remove the stroller
seat.
WARNING: Before using the stroller with the carrycot or car
seat, always make sure that the fastening system is properly
locked.
WARNING: Car seat: If not properly locked, press both white
keys on the fitting device on the structure and repeat the fit-
ting procedure, ensuring that it is fully locked in place. Other-
wise contact the Chicco customer service.
WARNING: before using, make sure that the carrycot is prop-
erly attached by pulling it upwards.
COMFORT KIT
The Comfort Kit comprises 2 shoulder straps and crotch strap.
28. Fit the shoulder straps over the straps as shown in figure
28 and insert the crotch strap in the relevant slot (fig. 28 A).
PRAM APRON/ LEG COVER
The carrycot cover may be also used as leg cover for the stroll-
er configuration.
29. To fit the leg cover, insert the legrest inside the leg cover
(Fig. 29) and pass the upper fabric strap over the handle,
securing it with the designated buttons/holes (Fig. 29A
-29B). The leg cover can also be used as a windproof cover,
by hooking it to the sides of the hood using the holes and
buttons provided (fig. 29C-29D).
CARRY-ALL BASKET
The stroller is equipped with a spacious basket.
30. To attach the basket on the stroller, insert the fabric strip
placed on the front in the relevant slot and fasten the but-
ton (fig. 30). Repeat this operation on the other side as well.
31. Attach the basket on the rear by fastening the fabric strip
onto the tube as shown in fig. 31, fastening the snap but-
ton. Insert the velcro in the relevant space and fold it over
onto the basket (fig. 31 A).
RAIN COVER
The stroller is equipped with a rain cover.
32. Attach the rain cover on the stroller using the slots in the
fabric located above the joint of the lateral tubes and the
snap buttons located above the front wheels (fig. 32). Af-
ter use, if wet, let the rain cover dry off before folding and
storing it. The rain cover can be used both forward facing
and parent facing.
WARNING: The rain cover cannot be used on the stroller with-
out hood, as it may cause suffocation. When the rain cover is
fitted on the stroller, never leave it exposed to direct sunlight
with the child inside, as the temperature will rise considerably.
N.B. IMPORTANT: The pictures and instructions contained
in the booklet refer to the complete stroller model some of
the components and functionalities described here may vary
depending on the version purchased.

WARRANTY

The product is guaranteed against any conformity defect in
normal conditions of use as described in the instructions.
The warranty shall not therefore apply in the case of damage
caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects, please re-
fer to the specific provisions of national laws applicable in the
country of purchase, where provided.
16