Care And Storage; Trouble-Shooting; Disposal - Crivit IAN 306977 Gebrauchsanweisung

You should therefore not use the
skates if the rollers cannot be fitted
perfectly. Never install larger rollers
than those originally used on the
roller skates.
Rollers become worn. The wear depends on
many factors such as skating style, surfaces, the
size and weight of the user, weather conditions,
the roller material and its degree of hardness.
It is therefore necessary to exchange them every
so often.
1. Unscrew the bolts (6) on the centre of the
rollers with a suitable spanner.
2. Remove the roller (5) from the skate and
attach a new roller to the mount.
3. Screw the bolt (6) securely back onto the
screw thread. The roller should not be able to
move laterally.

Care and storage

Roller skates are pieces of technical sports and
leisure equipment and they therefore become
worn depending on the skill and style of each
skater. We recommend that you clean and dry
the roller skates thoroughly after use.
Remove any small stones and other objects that
may have become trapped in your rollers.
Remove any sharp edges that may have formed
during skating. Always keep the skates in a dry
place.
• Clean the ball bearings with a dry
cloth after skating. Wet or damp ball
bearings must be dried using a clean
cloth. Lubricate the bearings from
the outside with a suitable bearing
grease to prevent the formation of
external rust.
• Bearings are usually closed and
cannot be lubricated inside. Worn ball
bearings must be replaced.

Trouble-shooting

• Rollers or ball bearings are noisy
Dismantle the roller from the shoe, remove it,
and clean the ball bearings with a clean cloth.
8 GB
• Rollers wear out quickly
Smooth surfaces extend the life of the rollers.
Try harder rollers for harder surfaces and for
use in difficult conditions.
• Roller skates pull to the left or right
This can depend on the user. Exchange the
rollers that show signs of one-sided wear.
• The brake is not working properly
Change the brake if the angle between the
brake and the ground is greater than 40
degrees, i.e. if the distance between the brake
block and the ground becomes too great
(more than 10mm). Rounded brakes need to
be exchanged for new blocks.
• Brake problems
Always leave sufficient distance to brake.
The faster you skate the longer your braking
distance. Ensure that you understand the bra-
king techniques and practise them on a level
ground.
• Ankles get turned frequently
Make sure that the laces are tight enough.
• Problems with the footbed
You may not be accustomed to this kind of
movement. Check the areas that are causing
your problems and re-adjust the skates. Try
wearing thick socks.

Disposal

Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the packa-
ging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally
friendly manner.
The recycling code is used to identify
various materials for recycling. The code
consists of the recycling symbol – which is
meant to reflect the recycling cycle – and a
number which identifies the material.