Silvercrest SKHL 40 A1 Bedienungs- Und Sicherheitshinweise Seite 16

Check the product before every use!
Discontinue use if any damage to the
product or the connection cable is
detected!
If you notice smoke or unusual noise
or odour, disconnect the product
immediately from the headphones
socket .
Sudden temperature changes
may cause condensation inside
the product . In this case, allow the
product to acclimate for some time
before using it again to prevent short
circuits!
Do not operate the product near
heat sources, e .g . radiators or other
devices emitting heat!
Do not throw the product into fire and
do not expose to high temperatures .
Ensure that no direct heat sources
(e .g . heating) can affect the
headphones .
Make sure that any contact with
splashed and dripping water and
corrosive liquids is avoided and the
headphones are not operated in the
vicinity of water .
16 GB/IE
In particular, the headphones should
never be submerged in liquid; do not
place any vessels filled with liquid, for
example, vases or drinks, on or near
the headphones .
The headphones should not be used
in the immediate vicinity of magnetic
fields (e .g . speakers) .
Make sure that he headphones are
never subjected to excessive shocks
and vibrations .
Ensure that no objects are placed
on the connected cable and that the
cable is not connected over sharp
edges because it could be damaged
otherwise .
It is necessary to repair the product if
it has been damaged in any way, for
example, if the housing is damaged,
if liquid or objects have penetrated
the device or if the product has been
exposed to rain or moisture .
Repair work is also required if the
device is not working properly or has
been dropped . If smoke is produced,
or there are any unusual sounds
or smells, disconnect the product
immediately .