Usb Operation - auna Oldschool Bedienungsanleitung

EN
40

USB OPERATION

The unit is designed to play MP3 files stored in the USB flash-drive. If the
files on the USB device do not conform to the standard, they may not be
played.
1. Slide the FUNCTION switch to CD/USB position. Press and hold the CD/
USB/PAIR/ button until USB mode indication "USB" shows on LED


display and USB indicator flashing.
2. Insert your USB flash-drive into the USB port, unit starts to read the USB
flash-drive.
Notes:
• USB supports flash drive capacity up to 32 GB maximum.
• Due to various USB flash drives in the market, please always fold down
the carrying handle before insert USB flash drive into the USB port.
When carrying this unit, be sure your USB flash drive is not taller than
the space under the carrying handle to avoid damaging.
• After reading the USB flash-drive, the unit will display the total number
of files on the flash-drive.
3. After reading the USB flash-drive, the unit will display the total number
of files on the flash-drive.
USB playback
After reading the USB flash-drive, press the PLAY/PAUSE button once, the
first track/file on the USB flash-drive will be played back. The "USB" and
"PLAY/PAUSE" indicators will be solid on during playback.
Play/Pause Control
To temporarily stop playing, press the
paused and the PLAY/PAUSE indicator will be blinking. Press
resume playback.
Stop playback
To stop playback, press the STOP button on the unit. The total number of
tracks/files on the USB flash-drive will be shown on the LED display.
Skip track
During playback, press the SKIP backward or forward buttons to skip to the
previous or next track/file.
+10 control
button. Music playback will be


again to

