auna Oldschool Bedienungsanleitung Seite 39

REPEAT MODES
Repeat 1 To repeat the current track, press the REPEAT BUTTON once,
the REPEAT INDICATOR will
flash in LED display. The track will continue to play until the
repeat function is turned off.
Repeat All To repeat all the tracks, press the REPEAT BUTTON twice, the
REPEAT INDICATOR will be solid on. All the tracks on the disc
will be played repeatedly.
To Cancel Repeat Function: Press the REPEAT BUTTON until REPEAT indicator
Function goes off from LED display.
Program operation
This function allows the tracks to be played in a programmed sequence.
NOTE: Programs can only be set in STOP mode.
1. In CD stop mode, press REPEAT/PROGRAM button, the PROG indicator
will light and Program Number "P01" will show on LED display.
2. Press the SKIP  or  button to select the desired track. The track
number "1" (001 for MP3 CD) will blink on the LED display to prompt for
input.
3. Press the PROGRAM button to confirm the selection. Program Number
advances to "P02".
4. Repeat step 2 to 3 to program up to maximum of 20 tracks.
5. When maximum of 20 tracks have been programmed, the LED display
will show "FUL" to indicate program is full.
6. When you have completed programming, press the PLAY/PAUSE button
to start playing. Both PROG and Play/Pause indicators are lighting
steadily.
7. To cancel programmed play, press the STOP button twice. PROG
indicator goes off.
Using treble/bass/balancecontrolknobs
• TREBLE: Adjust TREBLE level of music playback.
• BASS : Adjust BASS level of music playback.
• BALANCE : Adjust BALANCE for balance left and right speaker.
EN
39