Usb And Sd Operation - auna 10032730 Bedienungsanleitung

EN
26
press "PROG" again. Press "Play/Pause" to stop programming and start
to playback the programmed songs. This unit can program up to 20
songs.

USB AND SD OPERATION

USB
SD
1. Press "Mode" button until LED display indicates " usb". Then display will
show number of folder, then number of songs and start playback.
2. Press  or  or "F+/-10" to select your desired song.
3. Press "P/R/M" once to repeat one song, the REP indication at the top
left corner on the LED display will flash. Press the "P/R/M" display "REP
FOLDER" repeat album;Press "P/R/M" one more time to repeat all songs
in the track and the REP indication at the top left corner on the LED
display will appear.Press the display again "RAN" on the bottom of the
display, to play songs randomly.
4. To program, press "STOP" button to stop playback. Press "P/R/M" to
enter programming mode. The LED display will flash and indicate "P
01", select the song that you want to program and then press "P/R/M"
again. Press "Play/Pause" to stop programming and start to playback the
programmed songs. This unit can program up to 20 songs.
Recording function. During playback, press the REC button on the unit or
"ST / MONO / REC" on the remote control.