Getting Started - auna Oldschool Bedienungsanleitung

EN
34

GETTING STARTED

Power source
AC POWER OPERATION
An AC-DC Adaptor with the output of DC 12V, 1.5A (included) is required for
operating the main unit when using AC power mode. To connect the AC-DC
Adaptor to the unit and 230 V~ 50 Hz AC Outlet:
1. Firmly and securely insert the DC plug of the adaptor into the DC Jack on
the back of the unit.
2. Plug the AC Adaptor plug into the 230V AC outlet. CHARGE LED will
be lighting Red during battery charging. Connecting this system to any
other power source may cause damage to the system
3. Slide the FUNCTION switch on the top panel to RADIO,CD/USB or
BLUETOOTH/AUX mode to turn on the unit, the POWER INDICATOR will
light.
Note: When the unit is not operated for long periods of time, unplug the AC
adapter from the unit and wall outlet.
1.5A
Built-in rechargeable battery operation
1. This unit will also operate using the built-in Lithium rechargeable battery.
Fully charge the built-in rechargeable battery before first use, the ARGE
INDICATOR will turn from Red to Green when the built-in battery is fully
charged.
2. Unplug the DC INPUT jack of main unit. The unit will enter battery
operating mode automatically.
Low battery indication
1. When the build-in battery power remains around 5%, the CHARGE
INDICATOR will light Red and flash, please connect the unit to AC
adaptor for charging.