Cd/Mp3 Operation; Usb Operation - auna V-14.2 DAB Bedienungsanleitung

EN
30

CD/MP3 OPERATION

Switch to CD mode
Press PUSH to open the disc cover, then gently place the CD/MP3 disc
with the printed side uppermost on the disc compartment and then close
the disc cover. Press the
control to select CD mode.
Select tracks
Pressing PREVIOUS/NEXT buttons will skip to the previous/next track. Track
number will be shown on the display.
Pause playing
Press PLAY/PAUSE button on the player or on the remote control to pause
the player. Press it again to resume playing.
Stop playing
Press STOP button to stop the player. Press PLAY/PAUSE button to play
from the start.
Programming CD PLAY BACK
1. Press the stop button to stop playback.
2. Press the PROG button, the display window will show " P01".
3. Using the PREVIOUS/NEXT buttons to select the track. Press the PROG
button to confirm. Then the display window will show "PO 02". Repeat
this process to select other tracks as you want.
4. Press the PLAY button to start programming playback.
5. To stop programming playback, press the STOP button.

USB OPERATION

On the left side of the main unit, you will see the USB interface.
This player plays MP3 that are stored on USB device.
Connect the USB drive to the USB port on this player.

Press /MODE button to select USB mode. A contents menu is displayed
and play starts.
Select a file to play if play does not start automatically.

/MODE button on the player or on the remote