Usb Operation; Bt Setup - auna Columbia Bedienungsanleitung

EN
26
necessary.
5. When all the desired tracks have been programmed, press PLAY/PAUSE
BUTTON (7) to play the disc in assigned order.
6. To cancel the programmed file, press STOP button(10).

USB OPERATION

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored
in the memory media with USB connecting port.
1. Turn the source knob (2) to select "USB" mode.
2. Plug-in the USB plug with the face up & make sure it going into
completely.
3. The system will start reading the storage media automatically after
connecting, and LCD display (1) will show the total number of mp3/wma
files
4. Repeat the same playback procedure as playing cd/mp3 disc as above.
REMARKS:
The system can detect and read the file under mp3 and wma format only
though the USB port.
If connect the system to mp3 player via the USB socket, due to variances
in mp3 encoding format, some mp3 player may not be able to play via the
USB socket. this is not a maul-function BT of the system.
Connecting the USB upside down or backwards could damage the audio
system or the storage media (USB thumb drive). Check to be sure the
direction is correct before connection.

BT SETUP

1. Turn the source knob (2), select to the BT mode..
2. Select from your portable device (Smartphone, Tablet...) the ID BT
tagged as 200-7, then confirm connection
3. Now you can transfer the music to the ENV-1513 and all operations can
only be operated from your mobile device.