Benelli TnT CenturyRacer Benutzerhandbuch Seite 198

MAINTENANCE
6 • MAINTENANCE
Do not wash your motorcycle soon afterwards riding. Attend a few minutes to allow the engine and the
exhaust pipes to thoroughly cool.
Before washing the vehicle, stop up the exhaust pipes and protect the electrical parts. Never use washing
systems involving steam or high pressure water jets. These systems could cause water infiltration and
damage the internal parts of your motorcycle. Avoid cleaning the rims with fuel or solvents. Avoid using
clothes or sponges that have been in contact with strong or abrasive detergents,solvents or gasoline.To
avoid irreparable damage to the front fairing, never use alkaline or strongly acid detergents,petrol, brake
fluid or other solvents. Clean the front fairing only with a soft cloth, warm water and a neutral
detergent.
WARNING
Avoid smearing brakes or tyres with oil or wax. The presence of water on the brakes can lead to a decrease
of the braking effectiveness with subsequent risk of accidents. After completing the washing, run the
engine for a few minutes and start off at reduced speed. Carefully apply the brakes a few times so as to dry the
brake pads and discs.
87