Benelli TnT CenturyRacer Benutzerhandbuch Seite 144

OPERATIONS
4 • OPERATION
Resetting the trip mileage counters
The value of the"Trip" function can be reset pressing two times the START button.
NOTE:The instrument panel has an built-in memory which retains all the parameters even when the engine is not running. Except for
the clock, which is reset, all the parameters are retained even when the battery is disconnected.
Set "Chrono" / "Lap"
Move to the visualisation 2
To set the "Chrono" press the START button for less than one second.
To see the "Lap" from the "Chrono" position, press the START button for less than one second. Each time the START button will be
pressed for less than one second , the "Lap" function will indicate the "Chrono time, in the specific moment.
To stop the "Chrono" press the START button for less than one second.
To stop the "Chrono" press the START button for 3 seconds at least.
To leave the "Chrono" position, press the START button for 3 seconds at least, moving to the 3 "Clock" /"Trip"visualisation.
37