Horn Button; Start Button - Benelli TnT CenturyRacer Benutzerhandbuch

3 • CONTROLS AND INSTRUMENTS
Clutch lever
It is used to engage/disengage the clutch.
Control Lights
Pushing the switch you can turn the side lights into the headlights or dipped headlights.
Low/high beam button
When the light switch is in the position, the low beam is on. The high beam can be switched on by pressing the button when
allowed by the traffic and road conditions.
Control Turn indicator
It is used to show the rider's intention to change direction or lane.
WARNING:
Failure to switch the turn indicators on or off at the right time may cause an accident. Always switch
on the indicators before turning or changing lanes. Then be sure to switch off the indicators after
completing the operation.

Horn button

It is used to attract the attention of other road users in case of danger.
High beam flasher button
It is used to attract the attention of other road users in case of danger. When the high beam is on, the function is inactive.

Start button

It is used to visualize all the functions of the LCD display.
24
CONTROLS AND INSTRUMENTS