Specifications - Sony YS-SX310P Bedienungsanleitung

Specifications

Video signal format:
Based on PAL colour signal
standard (YS-SX310P)
Based on CCIR B/W signal
standard (YS-SX210CE)
Synchronization: Asynchronous individual inputs
(Internal synchronization for
VCR OUT terminal)
Camera input terminals:
VS or VBS, 1.0Vp-p/75 Ω, BNC
connector × 10
Camera output terminals:
VS or VBS, 1.0Vp-p/75 Ω, BNC
connector x 10 (Signal through)
VCR input terminal:
VS or VBS, 1.0 Vp-p/75 Ω, BNC
connector × 1
VCR output terminal:
VS or VBS, 1.0Vp-p/75 Ω, BNC
connector × 1
SP mode:
1 field/channel switching output
(3H mode: 2 fields/channel)
LP mode:
1 or 3 field(s) menu selectable
(6H mode: 2 or 3 fields)
MONITOR output terminal:
Video signal: VS or VBS, BNC
connector × 1 (compatible with
alarm display in full screen/split/
sequential display modes)
Alarm input terminals:
Contact close (×10)
Alarm output terminal:
DC 5 V 5.7 kΩ (low active)
Switch input terminal:
Low active (100 kΩ pull-up)
Control terminal: D-sub: alarm input, R/C (remote
control) input
Pin: Alarm output, switch input
Sequence timing: 0.5 – 30.0 sec (MONITOR output
terminal)
On-screen display: 8 character title, date/time, (A – Z,
0 – 9, symbols)
Buzzer: Internal (ON/OFF selectable for
alarm warning)
Still: Full screen/split screen (VCR
playback, Multi-viewer mode)
Zoom: Full screen/split screen (VCR
playback, Multi-viewer mode),
×2 zoom
30
(EN)
Power: AC 220 – 240 V 50Hz
Consumption: 14W (YS-SX310P)
12W (YS-SX210CE)
Operating environment:
Temperature: 0°C to 45°C (32°F to
113°F),
Humidity: 10% to 70%
420 × 54 × 320 mm (w × h × d)
Dimensions:
Mass: Approx. 4.2 kg
Design and specifications are subject to change
without notice.