Electrical Safety - Silvercrest SHLF 2000 D1 Bedienungs- Und Sicherheitshinweise

Before use, always check the
air filter for debris and dust. An
unclean air filter prevents air from
flowing through. This may result in
the product overheating.
Remove from the product's
heating area all firm, liquid and
gaseous materials that might
ignite.
Never insert any fingers or
foreign objects into the product's
openings.
NEVER touch the heating
elements with your hands.
If you notice any smoke or
unusual noises, immediately
disconnect the product from the
power supply. Have the product
checked by a specialist before
continued use.
In the event of a fire, first pull
the plug from the power outlet
or disconnect the product from
the power supply before taking
appropriate firefighting measures.
Never leave the product
unattended while it is in use.
10 GB
m CAUTION! Fire hazard!
This product is not intended to
be operated by means of an
external timer or separate remote-
control system. The product may
be switched on, for example even
when it is covered.
Do not move the product while it
is in operation or cooling down.
Do not use the product anymore
if it has been dropped.

Electrical safety

The product complies
with protection class II.
It has reinforced
insulation and therefore does not
require protective grounding.
The product may not remain
unattended as long as it is
connected to the power supply.
Make sure that the nominal
voltage on the rating plate
complies with the supply voltage.
The product has increased energy
consumption. Do not connect any
other devices (e.g. heaters, air
conditioners, etc.) to the same
circuit.