Names Of Parts (See Fold-Out Page); Technical Data; Safety Information; Terms Used - Silvercrest SKD 2300 A1 Bedienungsanleitung

Downloaded from www.Manualslib.com
RP74308 Konvektor LB4 Seite 4 Mittwoch, 16. Mai 2012 3:20 15
2. Names of parts
1 Rest for remote control
2 Control panel
3 Warning symbol - "Do not cover"
4 Air outlet
5 Display
6 Air inlet
7 Feet
8 Temperature sensor
9 Mains switch
10 Handle
11 Selected heating level display
12 "Fan" symbol
13 "Frost protection" symbol
Power supply:
Maximum power:
Protection class:
Batteries for remote control:
Ambient conditions:

4.1 Terms used

The following signalling terms are found in
these Operating Instructions:
Warning!
High risk. Disregarding
warning may cause injury to life
and limb.
Caution!
Medium risk. Disregarding the warning may
cause damage to property.
Note:
Low risk. Circumstances that should be taken
into account when dealing
appliance.
4
manuals search engine
(see fold-out page)
14 Selected unit of measurement display
15 Fan button
16 Increase temperature
17 Reduce temperature
18 Timer button
19 Running time display
20 Set temperature display
21 Measured temperature display
22 On/Off button
23 Infrared receiver for remote control
24 Button for selecting unit of measurement
25 Button for selecting the heat setting

3. Technical data

220 - 240 V~/50 Hz
2,300 watts
I
2x type AAA/R03 1.5 V
0 °C to +30 °C, max. 85 % relative humidity

4. Safety information

4.2 General information

• Before using the appliance, be sure to
read these
carefully. They are a component part of
the appliance and must be available at
the
all times.
• Use the appliance only for the purpose
described (see "1.1 Intended purpose"
on page 3).
• Check whether the mains voltage (see
type plate on the appliance) agrees with
your mains voltage.
with this
Operating Instructions