Panasonic AW-PH360L Bedienungsanleitung Seite 30

Connections
4When the camera and pan/tilt head are to be controlled by the AW-RP505 control panel
for transmitting composite signals
Nominal cross section
2
1.25 mm or more
AC adapter:
AW-PS300A
• Use the supplied camera cable to connect the unit with the convertible camera.
• Set controller selection switch SW1 to the right side (RP501), and select the transmission signal
selection setting that supports the analogue/IEEE1394 card.
• Use a 10BASE-T straight cable (UTP category 5) to connect the unit's CONTROL IN IP/RP
connector with the multiport hub's PAN/TILT CONTROL OUT connector.
• Use a coaxial cable (BBC No.PSF1/2M, BELDEN 8281) to connect the unit's CAMERA CONTROL
IN connector with the multiport hub's CAMERA CONTROL OUT connector.
• Use a coaxial cable (BBC No.PSF1/2M, BELDEN 8281) to connect the unit's VIDEO OUT
connector with the multiport hub's VIDEO IN connector.
• Use a 10BASE-T straight cable (UTP category 5) to connect the multiport hub's PAN/TILT
CONTROL IN connector with the controller's PAN/TILT CONTROL OUT connector.
• Use a coaxial cable (BBC No.PSF1/2M, BELDEN 8281) to connect the multiport hub's CAMERA
CONTROL IN connector with the controller's CAMERA CONTROL OUT connector.
• Use a coaxial cable (BBC No.PSF1/2M, BELDEN 8281) to connect the multiport hub's PREVIEW
OUT connector with the controller's PREVIEW IN connector.
• Connect the multiport hub's VIDEO OUT connector to the colour monitor's VIDEO input connector.
• Check that the pan/tilt head and camera can be controlled by the controller.
Camera cable
(supplied)
10BASE-T
(equivalent to UTP
category 5) straight
cable (max. 10 m)
10BASE-T
(equivalent to UTP
category 5) straight
cable (max. 500 m)
Coaxial cable (BBC No.PSF1/2M,
BELDEN 8281, max. 500 m)
- 29 (E) -
Genlock signals must be supplied if
a multiple number of cameras and
pan/tilt heads are to be used.
Preview colour monitor
Coaxial cable
Colour monitor
Multi hybrid control panel:
AW-RP505
Coaxial cable
(BBC No.PSF1/2M,
BELDEN 8281,
max. 10 m)
Multiport hub: AW-HB505